Doherty amplifier design for 3.5 GHz WiMAX considering load line and loop stability

M. A.Yarleque Medina, D. Schreurs, I. Angelov, B. Nauwelaers

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

2 Citas (Scopus)

Resumen

Legacy Doherty amplifier is characterized by using a larger transistor for the peak amplifier such that this reaches saturation with a smaller excitation signal. However due to device availability and modelling considerations, this is not often feasible. In this paper, the design and measurement of a Doherty amplifier utilizing only single sized device is realized. Unlike previous research works, intrinsic load line is utilized to tune the offset lines, as well as to verify the actual dynamic load principle. Stability aspects are covered for this type of amplifier, which are not normally included in earlier works. Finally an assessment of its applicability and benefits for WiMAX at 3.5 GHz is realized using a class AB amplifier as a comparison basis.

Idioma originalInglés
Título de la publicación alojada2008 European Microwave Integrated Circuit Conference, EuMIC 2008
Páginas522-525
Número de páginas4
DOI
EstadoPublicada - 2008
Evento2008 European Microwave Integrated Circuit Conference, EuMIC 2008 - Amsterdam, Países Bajos
Duración: 27 oct. 200831 oct. 2008

Serie de la publicación

Nombre2008 European Microwave Integrated Circuit Conference, EuMIC 2008

Conferencia

Conferencia2008 European Microwave Integrated Circuit Conference, EuMIC 2008
País/TerritorioPaíses Bajos
CiudadAmsterdam
Período27/10/0831/10/08

Huella

Profundice en los temas de investigación de 'Doherty amplifier design for 3.5 GHz WiMAX considering load line and loop stability'. En conjunto forman una huella única.

Citar esto