TY - JOUR

T1 - Assessment of combined in-plane and out-of-plane fragility functions for adobe masonry buildings in the peruvian andes

AU - Sumerente, Giovanni

AU - Lovon, Holger

AU - Tarque, Nicola

AU - Chácara, César

N1 - Publisher Copyright:
© 2020 Sumerente, Lovon, Tarque and Chácara.

PY - 2020/5

Y1 - 2020/5

N2 - In the city of Cusco and in other parts of Peruvian Andes, adobe masonry is the primary construction material. Adobe continues to be used for the construction of housing because of its low cost, its thermal properties, the use of unskilled labor, and the local traditions of the Peruvian highlands. The Peruvian National Statistics Office estimates that 67% of rural housing in Cusco is made of adobe masonry. Besides, previous seismic events and laboratory tests demonstrated that adobe dwellings without reinforcement are prone to collapse during an earthquake. Therefore, seismic vulnerability assessment of this type of dwellings is necessary aiming at developing proper contingency and mitigation risk policies. Then, fragility curves constitute a key tool when conducting seismic loss assessment because they provide information regarding the probability of exceeding a certain damage limit state as a function of a given engineering demand parameter. This work aims at developing fragility curves, combining in-plane and outof- plane loading conditions, for typical adobe buildings located in the city of Cusco. Initially, a set of one- and two-story adobe houses were studied to determine the geometrical characteristics of representative local building typologies. Subsequently, 1,000 artificial buildings were generated by means of Monte Carlo simulation based on the information gathered. The structural capacity of each artificial building was represented by simplified bilinear and trilinear capacity curves for in-plane and out-of plane mechanisms, respectively. In order to represent the characteristics associated with sub duction processes, a set of ground motion records was established. The damage state of each building was assessed for each seismic record, and this information was collected into a Probability Damage Matrix (DPM). Finally, fragility curves were fitted for each damage state of the cumulative DPM. Preliminary results show that one- and two story adobe dwellings have a probability of collapse of 30 and 60%, respectively, when considering a peak ground acceleration of 0.30 g, which corresponds to the expected acceleration related to a return period of 475 years over a soil type 2 according to the Peruvian Standards.

AB - In the city of Cusco and in other parts of Peruvian Andes, adobe masonry is the primary construction material. Adobe continues to be used for the construction of housing because of its low cost, its thermal properties, the use of unskilled labor, and the local traditions of the Peruvian highlands. The Peruvian National Statistics Office estimates that 67% of rural housing in Cusco is made of adobe masonry. Besides, previous seismic events and laboratory tests demonstrated that adobe dwellings without reinforcement are prone to collapse during an earthquake. Therefore, seismic vulnerability assessment of this type of dwellings is necessary aiming at developing proper contingency and mitigation risk policies. Then, fragility curves constitute a key tool when conducting seismic loss assessment because they provide information regarding the probability of exceeding a certain damage limit state as a function of a given engineering demand parameter. This work aims at developing fragility curves, combining in-plane and outof- plane loading conditions, for typical adobe buildings located in the city of Cusco. Initially, a set of one- and two-story adobe houses were studied to determine the geometrical characteristics of representative local building typologies. Subsequently, 1,000 artificial buildings were generated by means of Monte Carlo simulation based on the information gathered. The structural capacity of each artificial building was represented by simplified bilinear and trilinear capacity curves for in-plane and out-of plane mechanisms, respectively. In order to represent the characteristics associated with sub duction processes, a set of ground motion records was established. The damage state of each building was assessed for each seismic record, and this information was collected into a Probability Damage Matrix (DPM). Finally, fragility curves were fitted for each damage state of the cumulative DPM. Preliminary results show that one- and two story adobe dwellings have a probability of collapse of 30 and 60%, respectively, when considering a peak ground acceleration of 0.30 g, which corresponds to the expected acceleration related to a return period of 475 years over a soil type 2 according to the Peruvian Standards.

KW - Adobe

KW - Capacity curves

KW - In-plane failure

KW - Out-of-plane failure

KW - Seismic vulnerability

UR - http://www.scopus.com/inward/record.url?scp=85085101550&partnerID=8YFLogxK

U2 - 10.3389/fbuil.2020.00052

DO - 10.3389/fbuil.2020.00052

M3 - Article

AN - SCOPUS:85085101550

SN - 2297-3362

VL - 6

JO - Frontiers in Built Environment

JF - Frontiers in Built Environment

M1 - 52

ER -