Applied to thermal cracking and thermal hydrocracking

A suitable correlation can be made to represent the simulated distillation of heavy oils starting from thermoaravimetric measurements. This method is applicable to hydrocarbons having an initial boiling point equal or greater than 200°C, The simulated thermogravimetric distillation fit was obtained from experiments with the standard compounds obtained from ASTM D-2887-83 (Boiling range distribution of petroleum fractions by gas chromatography). This method is simple, fast and without problems when applied to heavy feedstocks. The data were used in the determination of average boiling temperatures of products from thermal cracking and thermal hydrocracking. It was also possible to quantify coke yields. Average relative molecular masses of products from the above processes correlated well with the average boiling point temperatures. It indicates that, with respect to the hydrocarbon types, thermal cracking is not selective in comparison with thermal hydrocracking. The equation applied to find the average boiling temperature is following: T = (1/al) (Ttg-a2). T is the boiling temperature, al and a2 are the correction factors, Ttg is the thermogravimetric temperature. © 1993, Taylor & Francis Group, LLC. All rights reserved.